UK&EU? 3 Axis CNC Kit Nema34 Stepper 12N. M Closed Loop Servo Motor 2HSS86 Driver

3 Axis CNC Kit Nema34 Stepper 12N. M Closed Loop Servo Motor 2HSS86 Driver for CNC Router Engraving Milling Machine.

Welcome European customers to our shop. 2-4 days to: Austria, France, Spain and Italy. 4-5 days to: Other Europe Countries. Servo Motor Closed Loop 156mm 6.0A.

3 x 3m extension wire. M; Current:6A; Peak current:8.0A; Phase:2; Size:86x86x156mm; Step Angle(degrees):1.8 degree; Motor Lead Wire: 4-wire; Encoder lines:1000. 2-Phase Hybrid Stepper Servo Driver; Frequency:0-200KHz; Insulation resistance:>=500MO; Voltage: AC 24-70V or DC 30-100V input. Stepper motor closed loop system, never lose step; The stepper motor control has a new generation of 32-bit DSP.

The vector control technology can ensure the accuracy of the motor; Improve motor output torque and working speed; Automatic current adjustment based on load; Pulses response frequency can reach 200KHZ; 16 kinds microsteps choice, highest 51200microsteps/rev. It supports over-current protection, over-voltage protection, position outside the tolerance protection. The build-in place in position and alarm output signal can help the upper monitor to monitor and control, the function of position ultra difference alarm can ensure the machine work safely. Closed loop stepper system can be applied to all kinds small automatic equipment and instrument.

Such as engraving machine, special industrial sewing machine, stripping machine, marking machine, cutting machine, graph plotter, cnc machine, automatic assembly equipment and so on. This motor driver kit fits all types of machine load conditions (including pulley and low stiffness pulley) without adjusting the gain parameters. M Closed loop servo motor.

Nema34 Closed loop servo motor 12N. Step Angle(degrees):1.8 degree. Insulation resistance:100MOhm(500V DC). 2HSS86 2-Phase Hybrid Stepper Servo Driver. HSS86 is 2 phase nema 34 series hybrid stepper servo driver.

It adopts new generation 32 bit DSP and vector control technology, which can avoid the stepper motor losing steps and ensure the accuracy of the motor. The torque reducing is much lower than open loop stepper motor when it is at higher speed. The high speed performance and torque are enhanced in a great extent. Meanwhile the current control is based on the load, that can reduce the motor temperature rising effectively, then can extend the using life of the motor.

The build-in place in position and alarm output signal can help the upper monitor to monitor and control. The function of position ultra difference alarm can ensure the machine work safely. The closed loop system is an ideal improvement and a good replacement of open loop system, Besides that, it also have some function of AC servo motors, but price is just half of AC servo. 2.2.1 Stepper motor closed loop system, never lose step. 2.2.2 Improve motor output torque and working speed.

2.2.3 Automatic current adjustment based on load, lower temperature rising. 2.2.4 Suitable for all mechanical load conditions (include low rigidity belt pulley and wheel), no need to adjust gain parameter. 2.2.5 Motor work smoothly and low vibration, high dynamic performance at acceleration and deceleration. 2.2.6 No vibration from high speed to zero speed. 2.2.7 Drive nema 34 series closed loop stepper motor.

2.2.8 Pulses response frequency can reach 200KHZ. 2.2.9 16 kinds microsteps choice, highest 51200microsteps/rev. 2.2.10 Voltage range: AC2470V or DC30V100V. 2.2.11 Over-current, over-voltage and position ultra difference protection function. Peak 8.0A (current change according to load).

Such as engraving machine, special industrial sewing machine, stripping machine, marking machine, cutting machine, laser phototypesetting, graph plotter, cnc machine, automatic assembly equipment and so on. Driver connector, indicator and wiring diagram.

3.1 motor and power supply input port. The encoder wires disconnected will lead to the damage of driver or encoder. If the signal control voltage is +5V, then the signal control input port do not need to connect an extra resistance.

If the signal control voltage is +12V, then the signal control input port need to connect to a 1K resistance. If the signal control voltage is +12V, then the signal control input port need to connect to a 2K resistance.

OC output, closed indicate finish the position, open circuit indicate position is not finished. OC output, there is alarm signal when closed, no alarm signal when open circuit. SW1:The choice of the motor. PWR:power indicator light : When power is on, the green light is on.

ALM:Alarm indicator light: If the red light is flicker one time within 3 seconds, that means over current or interphase short circuit. If the red light is flicker twice within 3 seconds, that means over voltage. If the red light is flicker three times within 3 seconds, that means position ultra difference.

Please check out your address carefully when processing order. We are not responsible for wrong or undeliverable address. Please give us the opportunityto resolve any problem when you have, we concern your problem and we will try our best to resolve it.

We work hard to make sure EVERY CUSTOMER 100% satisfaction. When you have the parcel, and not satisfied the goods or it is other problem like as broken, pls tell us the detail reason and provide the photos to us.

Item must be in it's original condition and no physical damage. We are online from Monday to Saturday.

This item is in the category "Business, Office & Industrial\Industrial Automation & Motion Controls\Electric Motors\General Purpose Motors". The seller is "powace1515" and is located in this country: DE.

This item can be shipped to United Kingdom, European Union.

Non-Domestic Product: No
Phase: 2
Peak current: 8A
Size: 86x86x156mm
Custom Bundle: No
Lead wire: 4pcs
Insulation resistance: 100MOhm(500V)
Insulation Class: B
Modified Item: No
Holding Torque: 12N.m
Brand: RATTM MOTOR
Servo Driver: 2HSS86 2-Phase Hybrid Stepper Servo Driver
Type: Hybrid
Voltage: AC24~70V or DC30~100V
Frequency: 0~200KHz
Country/Region of Manufacture: China
Current: 6.0A