DIY CNC 3018PRO-M 3 Axis CNC Router Kit + PCB Milling, Wood Carving Engraving Machine + ER11 and 5mm Extension Rod (Working Area 300x180x45mm). DIY Mini CNC Machine features two 5mm acrylic baffles on each side of the machine so that you can safely monitor the engraving process.A great tool for entrance CNC. Able to curved text on daily materials easily. Great for those who are interested in CNC, helping you engrave the model efficiently. CNC Engraving With an effective engraving area of 30 x 18 x 4.5 cm (11.8 x 7.1 x 1.8), the 3018pro-M can easily accommodate most projects. Control software: GRBL; Spindle: 775 spindle motor (12-36V) 24V:10000r / min. Supported System: Windows XP / Win 7 / Win 8 / Win 10 / Linux. DO NOT need to connect the computer. Manually adjust X, Y, Z axis location as engraving starting point, manually open or close spindle, manully open or close cooling fan. Note: Please don't use the computer and the Offline Controller at the same time, otherwise it will block the communication. Integrated Driver Chip + Fixed Heat Sink + External Fan + Sturdy Casing to extend the life of the control board, Self-contained short circuit protection, Not easy to damage. Suitable for carve wood, plastic, acrylic, PCB CCL, soft metal like copper and aluminum and other like materials, but can not carve hard metal, jade and other hard materials. Download the English manual and software. Package include: 1Set GRBL 3018 Pro Max 3 Axis CNC machine kit (Self-assembly, without laser) 1 x GRBL Controller board 1 x Spindle motor with ER11 collet 1 x U-Disk 10 x Flat bottom drill bits 4 x Plates 1×U disk Set of allen wrench 755 Spindle motor: Specification: Item Name:CNC 3018 Pro Max 3-axis laser engraving machine Working area: 30x18x4.5 CM Approx. 11.81x7.08x1.77 inches Mesa: 30x18CM (approximately 11.81x7.08 inches) Frame size: 42x35x27CM (Approximately 16.53x13.78x10.63 inches) Material: PA6 Nylon + Aluminum profile Workable thickness: 45mm (Height 64mm) Spindle: 775 spindle motor (12-36V); 24V: 10000 rpm Spindle Chuck: ER11 Collet Spindle PWM speed: Support power 0-100% adjustable Stepper motor: Nema17 42 stepper motor 1.3A, 0.25N. M Power supply: 24VDC power adapter, 5.6A (110-240VAC input voltage) Control board: upgrade version with shell and fan, best for dust proof, cooling and extending service life, firmware GRBL1.1f, offline work support. Connection: PC-USB connection (Windows XP / Win 7 / Win 8 / Win 10 / Linux) Software: GRBL controller Processing accuracy:About 0.2mm Screw: T8 T-screw, 4mm lead, double copper nut backlash GRBL 1.1f Control Board: Specification: 1.
Software: GRBL controller, UniversalGcodeSender 3. Master chip: atmel 328P (arduino nano) 5. Spindle drive chip: MOSFET recommendation 24V, current : within 10A 6. Spindle PWM speed: Support 7.
Support stepper motor: 12V, maximum current of 2A or less is recommended within 1.5A and additional heat. (Any stepper motor 42, 57) 8.Power Interface: 5.5-2.5mm DC interface. Any product you return must be in the same condition you received it and in the original packaging. We usually respond within 24 hours on weekdays. Thank you for shopping at our store!