CNC Controller 5 Axis Stand Motion DDCS Expert System MPG Extended Keyboard Kit

CNC Controller 5 Axis Stand Motion DDCS Expert System MPG Extended Keyboard Kit. 1 x 5 Axis CNC Offline Controller DDCS-EXPERT. 1 x 4GB USB Flash drive. 1 x M3K extended keyboard.

1 x USB extension cable. 1x 4GB USB flash drive. 2 x 75W 24V DC power supply.

1 x 6 Axis Pendant Handwheel MPG with E-Stop with plug. 4 Axis Offline controller DDCS EXPERT.

The DDCS Expert is a motion controller for open or close stepper and servo systems with 7/10.2 full color display screen. The highest output pulse per axis is 1MHz. The users can self-define the functional keys. This controller supports multiple spindle mode, support straight Tool Magazine, gantry type Magazine, disk type magazine. The Operation system interface even though very comprehensive, can be learned in very short time.

The DDCS Expert numerical control system adopts the ARM+FPGA design framework. ARM controls the human-computer interface and code analysis and the FPGA provides the underlying algorithms and creates the control pulse. This guarantees reliable control and easy operation. The internal operating system is Linux based. The DDCS Expert can be used for many styles and types of CNC machines.

Lathes, Routers, Pick&Place and Mills, lathe and cutters are just a few examples. The DDCS Expert operates as a Stand Alone system without the need of a computer. This guarantees high precision, accuracy and reliability.

5 Axis; 1M Hz output frequency for each axis; 2-4 Axis linear interpolation, any 2 axis circular interpolation. 2 7 inch full color display screen; resolution ratio: 1024600, 40 operation keys. 3 24 photoelectric isolated digital inputs, 21 photoelectric isolated digital outputs. 4 Analog spindle control 0-10V spindle control, also support PWM Output. 5 Magazine type: Supports multiple spindle mode, support straight Tool Magazine, gantry type Magazine, disk type magazine.

6 Probe Mode: Supprt Floating Probe and Fixed Probe. 7 Backlash compensation methods: direction gap compensation, radius gap compensation, length compensation.

8 Interpolation Algorithm: S type, circular hard algorithem, circular soft algorithm. 10 Software Alarms: Program Error, operation Error, overtravel Error, Driver Error and so on. 11 Network: Support file share and online machining the remote files by Ethernet. 12 Spindle control mode support Multi-speed (3 lines 8 kinds speed), 0-10V Analog output, and servo spindle output.

13 Compatible with standard G-code, support popular CAD/CAM software, such as ArtCam, MasterCam, ProE, JDSoft SurfMill, Aspire, Fusion 360 and so on. 14 The control system can preview the processing path before machining, and it makes the system more steady, working smoothy and precise. 15 Support high speed machining in continuous Polyline segment, system can choose a most efficient algorithm automatically from different kinds Polyline segment algorithm. 16 Support un-limited size file for machining. 17 Support Pause Breakpoint resume, "Power Cut" recovery, Start from the specific line.

19 Support 4 kinds operation rights: visitor, operator, admin, super admin. 20 Support function of "Try cutting" (handwheel guiding) and "Single-stage processing mode" and so on. 21 Support the fuction of Back to orignal point. 21 The Power Supply for the controller is 24VDC, minimum Current is 0.5A.

The DDCS-Expert is a small box that can fit in a window of a small control box or control cabinet. Four locking hooks fix this controller from the frame. The dimension you find in above figure. The front panel is 268mm172.5mm5.2mm. The main body is 268mm172.5mm70mm.

To mount the unit in an equipment cabinet, cut the hole 258.4mm109mm. The front panel consists of 40 user keys and the 7 inch (1024600) LCD. The stepper / servo control output, the Pulse and Direction signal output voltage is ± 5V.

DDCSE Input and Output are the user-defined IO ports, In our example, we already set IN24 as the " 5th axis servo alarm signal " input port. Limit, Home and Probe Inputs.

DDCSE Input and Output are the user-defined IO ports, In our example, we already set IN12, IN11 and IN10 as the " axis limit signal " Input port, and we already set the IN09 as " Probe " output port. Please note that the limit switch type should be NPN Normal Open, and the voltage range is 24VDC.

DDCSE Input and Output are the user-defined IO ports, In our example, we already set IN23 as the " External Start " input port, IN22 as the " External Pause " input port, and IN21 as " Extertnal Stop " input Port. Please choose the external buttons which is 24VD power supply input, then no need an external power supply for them. DDCS-Expert needs two power supplies, Main power is for controller system, IO Port power is for Input and Output and MPG ports. In the IO power input ports, the COM+ and COM- is the power input ports for Input/Output Port and MPG.

Please keep in mind, only when the two power supplies are connected correctly the controller can be work properly. In order to avoid electrical noise it is highly recommended to use two separate 24V power supplies.

In order to avoid high-frequency electrical noise from power supply cable, it is highly recommended to intall a noise filter at the power input to the switch power supply. DDCS-Expert wiring board, there are about 7 parts as following.

1 System Power and IO Power supply input Ports. 2 Driver Signal output Ports. 3 Input and Output Ports. 6 Ethernet and USB interface. CNC machine, it equipped with our popular machined MPG unit with 4 axis.

And scale selector, LED indicator also send feedback from the CNC machine to user about the status of the unit. All Wiring isolated from MPG unit and provide a easy to install wiring diagram, it suit both commercial machine as a replacement jog control unit or other computer based controller. Which add great control flexibility to the system. X, Y, Z, 4th axis selector switch or.

X, Y, Z, A, B, C. 6ft extendable high quality shielded cable cord.

Magnetic base holder can place anywhere on the machine steel surface. Required 5V+, 150mA, power for MPG. Phase output is A, /A and B, /B. TTL output, drive capability +-20mA.

Support CNC system:Taiwan Pou Yuen M600 M500 M520i T300 series, Higerman, HANUC, GSK, opened NC, KND, Siemens, the NUM, Spain FAGOR (NEW, 8055I) and so on. Wiring:User can wire this unit to the CNC system with easy. CNC system and position control of various mechanical devices, mainly for CNC machine tools and various mechanical zero correction and signal division. 100 times per revolution slightly.

Cracking point, 100 pulses per revolution output, holding the handle of the panel and all-metal high-grade design. Metal code disc, high precision, good texture. Easy installation, shaped thin, ultra-light. Voltage, single-ended, differential in three output options provide 100PPR pulse output options. Driver output type, anti-interference ability, long-distance transmission.

Oil, water, dust-proof design (grade IP65) spiral stretch 20 million guaranteed. Novelty, easy to move, interference, load capacity. Full plastic shell, insulation, high strength, anti-oil seal design. With × 1, × 10, × 100 third gear ratio, enabling 4-12 axis magnification switch. With the control switch, emergency stop switch optional, easy to operate. For CNC machine tools, printing machinery, numerical control equipment. OFF, X, Y, Z, 4.

M3K extended keyboard 2 x 75W 24V DC power supply. Double check your address when you order after.

We are not responsible for wrong or undeliverable address. If the order is during the weekends, it will be take extra 2 days longer. We care about our valued customers, and will always try to help you, hope to establish long business with you.

Pls give us the opportunity to resolve any problem, we understand the concerns and frustrations you might have, and will try our best to resolve the issues. When you have the parcel, and not satisfied the goods or it is other problem like as broken, pls tell us the detail reason and provide the photos. We will help you to solve all problems. This item is in the category "Business, Office & Industrial\Industrial Automation & Motion Controls\Other Automation Equipment".

The seller is "rattmmotor" and is located in this country: DE. This item can be shipped to United Kingdom, European Union.

Brand: RATTM MOTOR
Country/Region of Manufacture: China
Application: CNC Router Milling Engraver/Servo/Stepper
Axis: 5 Axis