ACT 4Axis Nema23 23HS2442B 4.2A 112mm 425oz-in double shaft Schrittmotor CNC kit

4PCS Nema23 stepper 23HS2442B 4.2A 112mm 2.8N. 4PCS Driver DM542 24-50V 4.2A 128 Microsteps. 2PCS Power Supply 350W 36V. 0,8 ohm ± 10%. 3,8 mH ± 20%. 8mm & Back 6.35mm. Front 21mm & Back 15mm. Manual of 2-phase hybrid stepper motor driver. DM542 is a type of two-phase hybrid stepping motor driver, The drive voltage of which is from. It is designed for use with 2-phase hybrid stepper motor of all kinds. With 42mm to 86mm outside diameter and less than 4.0A phase current. This circuit that it adopts is similar to the circuit of servo control which enables the motor run smoothly almost without noise and vibration. Hording torque when DM542 run under high speed is also significantly higher than the other two-phase driver, what is more, the positioning accuracy is also higher. It is widely used in middle and big size numerical control devices such as curving machine, CNC machine, Computer embroider machine, packing machines and so on. L High performance, low price. L Average current control, 2-phase sinusoidal output current drive. L Supply voltage from 24VDC to 50VDC.

L Overvoltage, under voltage, overcorrect, phase short circuit protection. L 15 channels subdivision and automatic idle-current reduction. L 8 channels output phase current setting.

L Offline command input terminal. L Motor torque is related with speed, but not related with step/revolution. L High hording torque under high speed. Not condensation, no water droplets.

Prohibition of combustible gases and conductive dust. The first three bits (SW 1, 2, 3)of the DIP switch are used to set the dynamic current. Closest to your motor is required current. Semi-flow function is that there is not step pulse after 500 ms, the driver output current automatically reduced to 70% of rated output current, which is used to prevent motor heat. (1)+ v , GND:Power Supply.

+V: Power supply, 1650 VDC, Including voltage fluctuation and EMF voltage. The max current is 5A.

(2) A+ A- B+ B-:Connecting 2 phase stepper motors. The driver & 2-phase hybrid stepping motor use four-wire connection, the motor can be connected in parallel & series bipolar. As for bipolar connection, it is higher performance with high-speed, but the current of driver is larger (it is 1.73 times more than the motor winding current). Connecting in series, the driver's current is equal to the motor winding one. Make sure the motor connect to a constant current or chopper drive controller before start the motor. It will destroy the motor when connecting the motor to a power supply directly. Stellen Sie sicher, dass der Motor an einen Konstantstrom- oder Chopper-Antriebsregler angeschlossen ist, bevor Sie den Motor starten. Der Motor wird zerstört, wenn der Motor direkt an eine Stromversorgung angeschlossen wird. Selection The store only uploaded part of the products, you can send me the parameters to choose the suitable model for you. Auswahl: Der Shop hat nur einen Teil der Produkte hochgeladen. Sie können mir die Parameter senden, um das für Sie geeignete Modell auszuwählen. OEM-Service: Wir sind ein Hersteller, der Produkte an Ihre Bedürfnisse anpassen kann. Auch Wenn Sie viel kaufen möchten, kontaktieren Sie mich bitte Ich werde Ihnen einen großen Rabatt geben! The item "ACT 4Axis Nema23 23HS2442B 4.2A 112mm 425oz-in double shaft Schrittmotor CNC kit" is in sale since Wednesday, August 18, 2021. This item is in the category "Business & Industrie\Automation, Antriebe & Motoren\Elektromotoren\Schrittmotoren". The seller is "actmotor-2021" and is located in Bremen. This item can be shipped to European Union member countries.

Isolationsklasse: CLASS B
Lieferumfang: Nur Motor
Marke: ACT MOTOR
Nennstrom pro Phase: 4.2A
Herstellernummer: 23HS2442B
Drehmoment: 2.8N.m425oz-in
Stromart: Gleichstrom (DC)
Nennspannung (ungefähr): 24-48V
Maßeinheit: kg
Vollschrittwinkel: 1.8° (200 Schritte)
Herstellungsland und -region: China
Anschlussbelegung: 4-Draht Zweipolig
Widerstand pro Phase: 0,8 ± 10%ohm