(425oz-in, 112mm, 3A, 1.8deg). 4 x CW5045 motor driver. (24-50V DC, 4.5A, 256microstep).1 x 400W 36V 11A switching power supply. 1 x 5 Axis breakout board V5 type.
1 x DB25 parallel cable. 100% Brand New and High Quality! 4 Axis for medium size Router Mill Plasma or Laser. It can most connection 5pcs driver and control 5pcs motor in the same time.
It is with 4-wire limit switch to insure our safty movement. It is with relay port to contro the cnc spindle. Working voltage is 5VDC and support with MACH3, EMC2, KCAM4 software. 25-pin parallel port control is defined as follows. The pin of the drive board.
B(Fifth axis)pulse signal. X(First axis) pulse signal.X(First axis) direction of the signal. Y(Second axis)direction of the signal. Z(Third axis) pulse signal. Z(Third axis) direction of the signal.
A(Fourth axis) pulse signal. A(Fourth axis) direction of the signal. B(Fifth axis) direction of the signal. CW5045 high microstep stepper motor driver. Full current or half current choice : SW4:0=Full current; 1=half current.
To avoid use in the oil contamination, dust and corrosive gas environment. To lay it in a place with good ventilation. Pls note the connection with right power(+ and -) to avoid broken the driver. Pls test it when confirm the connection is right. Step angle accuracy:+ - 5%(full step, not load).Resistance accuracy: + - 10%. Inductance accuracy:+ - 20%. Temperature rise: 80deg Max(rated current, 2 phase on).
Ambient temperature ----------20deg ---- +50deg. Insulation resistance:100ohm Min, 500VDC. Insultion Strength--------500VAC for one minute. 400W, Input:100-120VAC or 200-240VAC, 50/60Hz, Output:36v/9.7 A, single output switching power supply.
Please check out your address carefully when processing order. We are not responsible for wrong or undeliverable address. 1530 workings days to most other countries.When you have the parcel, and not satisfied the goods or it is other problem like as broken, pls tell us the detail reason and provide the photos, we will help you to solve any problems. We work hard to make sure EVERY CUSTOMER 100% satisfaction. The item "4Axis Stepper Motor NEMA23 425 oz.
In 3A+Driver 256microstep Schrittmotor CNC Kit" is in sale since Thursday, September 16, 2021. This item is in the category "Business & Industrie\Automation, Antriebe & Motoren\Elektromotoren\Schrittmotoren". The seller is "powace1515" and is located in Lausanne. This item can be shipped to European Union member countries, United Kingdom.