3 Axis Kit for CNC DIY. 15 Axis Breakout Board(Pro) +3EMA2-050D42 Microstep Motor Drivers.The breakout board in this kit is professional version, which has been upgraded to an intelligent and industrial-level interface board set including control pad and display panel. Compared to standard version, professional version mainly has two more functions. One is the "computer G-code recording function", and the other is the "manual programing function". With the embedded intelligent memory chip, this breakout board can easily record MAXIMUM 4 axis (X, Y, Z, A axis) G-code running on the CNC software e. Of the computer, after which you can control the microstep drivers and stepper motors via using the recorded G-code without computer.
The upgraded built-in manual control tools (display panel and control panel) not only can be used for manual motor control, but also for manual G-code programming. Manually programmed G-code will be recorded onto the embedded intelligent memory chip, after which you also can easily control the microstep drivers and stepper motors with recorded G-code. This function is widely applied in RBI machine, Conveyor etc. The stepper driver board controller in kit is a high performance microstepping driver adopting of 32-bit DSP, pure sine wave subdivision technology.
With this technology and the self-adjustment technology (self-adjust current control parameters) for different motors, the drive motors can run with less noise, lower heating, smoother movement and have better performances at higher speed than most of the drivers in the market. This kit is suitable for driving 2-phase and 4-phase. Hybrid stepper motors with a. In short, you will get more benefits from the Kit on CNC work, especially extra-low motor noise offers excellent quietness. 5 Axis Professional Breakout Board.Automatic G-code recording for motor control. Manual G-code programming for motor control without computer.
Equipped with the display panel and control pad for. Manually control the stepper motor. Automatically finish Tool-settings on X, Y, Z Axis via the control pad , without the support of the computer. Real-time trail the running path of G-Code.
On the computer or input by the control pad, and then completely and synchronously display the changing of MAXIMUM FOUR axis X, Y, Z A axis etc. Values on its screen, it is completely synchronous with the values changing on the FOUR coordinates of Mach. To get power: 5V DC power supply or USB port to get power from PC directly.Compatible with all the 2 phase, 3 phase and 4 phase microstep drivers in the market. Signal processing, smooth signal transmission, powerful anti-jamming. Accessed by the spindle motor or the air pump, water pump, etc.
Of input control in manual control interface, to set Limit, Estop, Midpoint-Setting, Cutter-presetting/Tool-Setting etc. The 5th axis (B axis) on the breakout board can be used as a.For controlling frequency inverter via software e. To adjust speed of main spindle.
Compatible with the Mach2, Mach3(Default Software), LinuxCNC(EMC2), KCAM4 CNC Software , etc. Function when the wirings between the breakout board and microstep drivers are incorrect. Please note: This board uses parallel port to communicate with computer, the USB is used for providing power for the board. Extra-low motor noise offers excellent quietness.With 8 stalls output current setting. Adoption of 32-bit DSP, pure sine wave subdivision technology. Low-noise, low-vibration and low temperature rising. With 15 stalls microstep subdivision setting.
Automatic Half Current, motor wires miconnected protection. Internal optical isolation, pulse input frequency up to. Short-voltage, over-voltage, over-current and short-circuit protection, protect the motors, driver from being damaged. Suitable for 2-phase and 4-phase Hybrid stepper motors. Suitable for a variety of small sized automation equipment and instruments.
For any small-and-medium automatic equipment with CNC controller, such as engraving machine, plasma cutting machine, milling machine, foam cutting machine, lathes, laser cutting machine etc. For other industrial application, such as 3D printer, medical instruments, stage light equipment, robot, music fountain etc. Electrical Properties of 5 Axis Breakout Board(ambient temperature Tj = 25°C).
5V DC via power adapter or directly get power from PC via USB port. Pulse Direction Enable Signal Control. 2 Phase, 3 Phase, 4 Phase Microstep Driver EMA2-050D42/EMA2-070D56/EMA2-080D72/EMA2-220A80 etc. Technique Parameter for EMA2-050D42 Stepper Driver Hybrid Stepper Motor. Natural Cooling or Fan Forced cooling.Avoid dust, oil fog, corrosive gas. Or ordering for use of your employer and find out the Accounting Department always require a VAT invoice for reimbursement? Invoice will be provided in electronic format. If you are VAT registered in any EU countries, your order could be processed as UK VAT EXEMPT.
EU VAT registration number and registered address. UK&EU Individual Customer (non-VAT registered).
Invoice is also available upon request. However, 95% parcels will be delivered within the reference time. Other Western Europe Countries: Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Liechtenstein, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland.
Other Countries & Districts (May depart from other stock location). Other Countries (May depart from other stock location).Australia (VIC, SA, QLD, NT). Deutsche Post, DHL oder Hermens.
Wenn Sie die besondere Anforderung haben, kontaktieren Sie und bestätigen Sie bitte mit uns vor Bestellung. Anforderung, die Ware dringend bekommen. Anforderung, dass die Ware aus einem bestimmten Ort geliefert werden. Anforderung, dass die Ware innerhalb einer bestimmten Zeit geliefert werden. Für weitere Fragen/Anforderung über die Lieferung.Andere Länder (Vielleicht Schiff aus anderen Lagerort). Die Benachrichtigung wird gesendet, nachdem Ihre Bestellung versandt wird. Alle Pakete werden per Luftpost versendet. Es ist nicht garantiert, dass alle Pakete innerhalb der oben genannten Lieferzeit ankommen. Allerdings werden 95% Pakete innerhalb der Referenzzeit geliefert.
Es ist unmöglich, die Sendung der Luftpost im Internet zu verfolgen. Wir helfen Ihnen, wenn Sie das Problem mit der Sendungsverfolgung haben. We accept free replacement if you receive a not-as-described(defective, incorrect, parts missing) product.
The item "3 Axis CNC Kit Mach3 Professional Control Board & EMA2-050D42 Stepper Drivers" is in sale since Monday, August 12, 2019. This item is in the category "Business, Office & Industrial\Industrial Automation & Motion Controls\Drives & Starters\Drives & Motor Controls\Stepper Controls & Drives".The seller is "sthnice" and is located in MIDDLESEX . This item can be shipped to all countries in Europe.