Cnc Axis Kit

4Axis Nema 23 Stepper Motor 3Nm(425oz. In) 4.2A & Driver DM556T CNC Router Kit

4Axis Nema 23 Stepper Motor 3Nm(425oz. In) 4.2A & Driver DM556T CNC Router Kit
4Axis Nema 23 Stepper Motor 3Nm(425oz. In) 4.2A & Driver DM556T CNC Router Kit
4Axis Nema 23 Stepper Motor 3Nm(425oz. In) 4.2A & Driver DM556T CNC Router Kit
4Axis Nema 23 Stepper Motor 3Nm(425oz. In) 4.2A & Driver DM556T CNC Router Kit

4Axis Nema 23 Stepper Motor 3Nm(425oz. In) 4.2A & Driver DM556T CNC Router Kit

4 x Digital Stepper Drive 1.85.6A 20-50VDC DM556T. 4 x Nema 23 Bipolar 3Nm (425oz. In) 4.2A 57x57x114mm 4 Wires Stepper Motor CNC. 2 x 250W 36V 7A 115/230V Switching Power Supply.

Step Angle: 1.8 deg. Holding Torque: 3.0Nm(425oz.

Inductance: 3.8mH ± 20%(1KHz). Frame Size: 57 x 57mm. Anti-Resonance for optimal torque, extra smooth motion, low motor heating and noise.

Motor auto-identification and parameter auto-configuration for optimal torque from wide-range motors. Step & direction (PUL/DIR) control. Multi-Stepping for smooth motor movement. TTL compatible and optically isolated inputs.

16 selectable micro-step resolutions of 400-25,600 via DIP switches. 8 selectable output current settings of 1.8 - 5.6A via DIP switches. Soft-start with no "jump" when powered on.

Pulse input frequency up to 200 KHz. Protections for over-voltage and over-current.

AC input voltage range: 93132V/176264VAC. 115V/230V AC selected by switch. Forced air cooling by built-in DC fan. Low output ripple and yawp.

Over current, over voltage, short circuit and overheat protections. The item "4Axis Nema 23 Stepper Motor 3Nm(425oz.

In) 4.2A & Driver DM556T CNC Router Kit" is in sale since Thursday, December 3, 2020. This item is in the category "Business, Office & Industrial\Industrial Automation & Motion Controls\Electric Motors\Stepper Motors". The seller is "eu-stepperonline" and is located in Leicester, Leicestershire. This item can be shipped to United Kingdom.

  • Brand: STEPPERONLINE
  • MPN: 4DM556T23HS45
  • Nominal Rated Input Voltage: 24-48VDC
  • Current Type: DC
  • Full Step Angle: 1.8° (200 Steps)
  • Wiring Configuration: 4-Wire Bipolar
  • Shaft Type: D-cut
  • Actual Rated Input Voltage: 24-48VDC
  • Holding Torque: 3.0Nm(425oz.

    in)
  • Rated Current per Phase: 4.2A
  • Resistance per Phase: 0.9ohms
  • Shaft Diameter: 10mm
  • Country/Region of Manufacture: China

4Axis Nema 23 Stepper Motor 3Nm(425oz. In) 4.2A & Driver DM556T CNC Router Kit